This locking 2' x 2' suspended ceiling tile enclosure is designed for WAPs and DAS remote units with detachable antennas. This white powder-coated steel enclosure replaces a standard ceiling tile and is UL listed for installation in the plenum space. Interchangeable doors mount leading vendors APs and antennas nearly flush to the ceiling to provide for a professional, aesthetic installation. The interchangeable doors simplify AP moves, adds, and changes without lifting ceiling tiles.

  • Model1052-ccoap
Technical Specifications Design: Ceiling tile enclosure specifically designed for Cisco series wireless access points. Door has special mounting bracket to hold the access point in the door. Performance: UL Listed and designed to meet NEC300-22 and 300-23 for plenum installations. OSHPD approved OPM-0110-13. Locking, fully-hinged interchangeable doors for different access points Firestop grommet for insertion into back-box, large enough for 2 Cat6A cables 1” trade size knockouts in four walls Back-box: Effective as a dust barrier for ICRA procedure compliance Construction: Construction: 16 ga. galvanized steel back-box; 14 ga. door; textured, white, powder-coated steel Enclosure must be supported by the building structure, independent of the suspended ceiling, per NEC paragraph 300.11; includes hanger wire Maximum weight inside enclosure is 25 lbs. For recessed grid ceilings, designate “–T” for tegular flange units AP max. operating temperature should be de-rated by 8° C inside the  enclosure Size: 23.75 inches by 23.75 inches by 4.5 inches (603 mm by 603 mm by 76mm); back-box is 12.5 inches by 12.5 inches by 4.5 inches deep (318 mm by 318 mm by 114 mm deep) Standards for Safety UL 50 listed, TYPE 1, for indoor use only USL - Investigated using requirements contained in Standard UL 50 - Twelfth Edition, and UL 50E - First Edition CNL - Investigated using requirements contained in Canadian Standard CSA/C22.2 No. 94.1 and 94.2 UL 2416, Audio/Video, Information and Communication Technology Equipment Cabinet, Enclosure & Rack Systems CSA C22.2 NO. 60950-1-07 + Amd. 1 Amd. 2 Information Technology Equipment -- Safety. Part 1, General Requirements OSHPD Approval OPM-110-13 Measurements (Maximum values): • Height: 23.75 in. • Width: 23.75 in. • Depth: 4.5 in. • Item Weight: 16 lbs. • Shipping Weight: 22 lbs. Includes WAP mounting screws (4) Suspension wires (1) Firestop Grommet Grounding screw Universal T-bar internal AP mounting bracket Mounting instructions Available Accessories Mounting Plate: Universal Mounting Plate - 38-52-MNT-KIT Jumper cables and Antennas: Snap-In RPSMA Bulkhead Connector Kit - 35-BULKHD-KIT-RPSMA Snap-In RPTNC Bulkhead Connector Kit - 35-BULKHD-KIT-RPTNC Color Matched Dual Band Wi-Fi Antenna - 34-ZDUAL Color matched Dual Band Wi-Fi Antenna - 34-DMDUAL Security: Power over Ethernet Interlock Switch (PoE ILS) - Model 1790 Documentation LinksSpec Sheet - Instructions - Customer Prints - OPM Drawing -
Features & Benefits
  • Locking ceiling tile enclosure designed specifically to secure wireless access points from most vendors
  • UL Listed
  • Meet NEC300-22 and 300-23 for plenum installations; approved for AC line power
  • Fully-hinged locking door, keyed alike
  • Interchangeable doors permit simple migration to new access points and antennas
  • Back-box is deep enough to contain most vendors access points and connectors
  • Enclosure back-box is effective dust barrier to simplify ICRA compliance in hospitals
  • OSHPD approved
Office Facilities US & Canada
Support Model Direct through third party or partner, No customer service available, Through third party
Support Coverage Hours Standard business hours
TAC Hotline 1-877-867-2312 x204
TAC Support Alias


Version Verified Compatible Cisco Product Date Tested
1052-CCOAP None N/A